Corsair H150i PRO Review Introduction

Corsair Hydro Series H150i PRO

We review the new Corsair Hydro Series H150i PRO - an AIO Liquid cooler series that Corsair injects into the channel. With a tiny bit of RGB, bling Corsair promises to deliver ultra-silent performance with more than adequate cooling capacity. The H150i PRO is the big dawg in the new line-up, this cooler has a 360mm radiator with corresponding three 120mm fans. The 'I' in the naming refers towards LINK software. This allows you to program, customize and monitor this all-in-one liquid cooling solution for your processor. Armed with two ML (Magnetic Levitation) PWM based fans and that radiator the cooling capacity should be good. The Corsair's LINK applications will also allow you to customize LED lighting directly from the software.

These days you can pick a hundred different heatpipe based coolers, where many are shaped, formed and priced the same. The better heatpipe based coolers are good though. Next in line are LCS systems (liquid cooling), the entry-level products are affordable, easy to install pre-fab liquid cooling kits. We've seen and tested many of them as Corsair, Asetek, CoolIT, NZXT, Cooler Master and so on, all have interesting kits. The bigger problem is cooling performance. The gear behind these kits are good yet the performance is often battling a small included 120mm radiator with thin tubing and lacking coolant levels due to missing reservoirs. To compensate FAN RPM goes up making a good looking product noisy again. With that in mind Corsair started to develop a new H series (for Hydro) coolers. The product we test in specific is the Corsair H150 PRO. It is an updated design based on the previous models, yet with new cooling block and regulated control for pump and fans. Next to that what's interesting is that this product (for this review) is based on a 360mm radiator which gives it quite a bit of cooling surface area. It is a cooler series that is easy on the eyes, has very subtle RGB lighting with control and comes with a relatively tool free installation. The unit will offer good performance, not exceptional as key for this release are low noise levels. In fact, especially for this new product, you can select an optional 0-DBA mode. As long as the coolant stays under 40 Degrees C the fans do not spin, which is something we have seen for the past two years on most graphics cards we well. The H150i PRO is compatible with Corsair's LINK software. You hook up the LCS unit towards a USB port and then the software allows you to program, customize and monitor this easy to install liquid cooling solution.

So without further ado, let's have a peek at the Hydro Series Corsair H150i PRO and then head onwards into the review.

 

 

Source : http://www.guru3d.com/articles-pages/corsair-h150i-pro-review,1.html

Here you can find information about how to track lost phone with imei number

Corsair H150i PRO review - Introduction
Corsair H150i PRO RGB AIO CPU Cooler Review
Corsair H150i Pro (360mm AIO) Liquid Cooler Review
Review: Corsair Hydro Series H150i Pro RGB
Corsair's H115i Pro and H150i Pro CPU coolers reviewed
Corsair H150i Review: The First 6th Gen Asetek Pump
Corsair Announces New Lineup Of AIO Coolers
Corsair's new H115i Pro and H150i Pro
Corsair H150i Pro CPU Cooler Review
Corsair H150i Pro RGB 360mm AIO Cooler Review
[LIMITED STOCK!] Related eBay Products